Hall Effect Current Sensor Clip on Linear Hall Sensor

Product Description

C3 series dismountable hall effect current sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
 

Electrical data (Ta=25ºC±5ºC,RL=2KΩ,CL=10000PF)

Type	C3-400A	C3-600A	C3-800A	C3-1000A	C3-2000A	Unit
Rated current(Ipn)	±400	±600	±800	±1000	±2000	A
Measure range(Ip)	0-±800	0-±1200	0-±1600	0-±2000	0-±3000	A
Rated output	@Ip=±Ipn               ±4±1%					V
Supply voltage	±12,±15					V
Power Consumption	<25					mA
Offset voltage	@Ip=0                     ±20					mV
Magnetic offset	@Ip=±Ipn-0                ±20					mV
Offset drift	@ -40~+85ºC               ≤±1					mV/ºC
Output drift	@ -40~+85ºC               ≤±1					mV/ºC
Linearity	@Ip=0-±Ipn                 ≤1					%FS
Response time	@50A/μS, 10%-90%         ≤5					μs
Galvanic isolation	@ 50HZ,AC,1min              5					KV
Isolation resistance	@ DC 500V                 1000					MΩ

 

Applications

·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·Electrochemical
 

Mechanical dimension(for reference only)

Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation:  1:+15V  2:-15V  3:V0UT  4:0V
 

Directions for use

1. When the current will be measured goes through a sensor, the voltage will be measured at the output end.(Note: The false wiring may result in the damage of the sensor)
2. Custom design in the different rated input current and the output voltage are available.
 

Standards

·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000
 

General date

	Value	Unit
Operating temperature(TA)	-40 to +85	ºC
Storage temperature (TS)	-40 to +125	ºC
Mass(approx) (M)	300	g

 

Characteristics chart

 
Pulse current signal response characteristic: