Single Phase Electric Watt Hour Meter Red Infrared Anti Tamper Energy Meter

• Customization: Available
• After-sales Service: 24 Hours
• Warranty: 3 Years
• Model NO.: DDS450CTPT
• Installation: Direct Connected
• Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter
• Electric Equipment: Single-phase
• Theory: Electronic Meter
• Power Meter Connection: Terminal
• Measured Signal: Pulse Peak
• Type: Energy Meter
• Certification: RoHS, ISO, CE
• Customized: Customized
• Phase: 1p 2W
• Voltage: 220V
• Function: Anti Tamper
• Tarrif: 1 Tarrif
• Anti Tamper: Zero Line Work
• LCD Display: Volt. AMP. Kw
• Class: 0.2
• Transport Package: Carton
• Specification: CE ROHS
• Trademark: JUNKE
• Origin: Zhejiang Yueqing
• HS Code: 9028901100
• Production Capacity: 10000PCS/Month

Product Description

Glass cover ,bakilite case ,with transparent terminal cover 
LCD display will show KW, KWH AMP.VOLTAGE 
ANTI TAMPER 
GENERALFEATURES
Installation:Outdoor
Type:Electronic
Application:Registration of active energy on single phasesupplied for bi-directional load
Rated System voltage:240 V(Phase to Neutral)
Voltage variation range:-30% to +15% of reference voltage
Connection:1-phase, 2 -wire, Bottom connected
Number of Element:2 (Two)Element.
System Frequency:50HZ
Frequency variation:5%
Rated Current:Basic current shall be up to 10 Amps(but not exceeding 10Amps )and Maximum current shall not be less than 40 Amps.
Starting current:<20 MA
Accuracy Class:As per IEC 62052-11 IEC 62053-21 for alternating currentElectronic Meters of accuracy class 1.0

REGISTERING MECHANISM
1.The registering mec anism shall be of a Liquid Crystal Display ( LCD ) having a 6 ( six ) or more digitdisplay in Kwh including 1 decimal place . The ei t of the digit shall be mm and width shall be 5mm
2.The LCD display shall be of good quality an shall not deteriorate during the service life of the meter .The display values shall be sharp and have good contrast with the background . The LCD shall have a lifeexpectancy of 15 years under normal temperature and humid condition .
3.The LCD shall have a backlit display for easy reading of display parameter in low light conditions . The 7segments LCD shall display accurately cumulative active energy with maximum demand
4.The LCD can be set to operate even if mains pnot available , that is meter reading can be takenby pressing or touching button or by any oter means even during power failure conditions . For thatpurpose the meter shall have a lithium , non-rechargeable , maintenance free battery to support fordisplaying the register values during mains power outagbattery will also support the functionalityof Real Tme lok The mmm ev i e f e batery shall be 15 ( Fifteen ) years and the batterycapacity shall be at least 1600 MAH . The battery life and capacity shall be supported by test report