Epoxy Resin 400V 16kvar Automatic Power Factor Correction Capacitor

Product Description

epoxy resin 400V 16KVAR  Automatic Power Factor Correction capacitor 
1.low voltage shunt type 
2.30% reduce power loss
3.dry type ,no pollution
4.explosion proof device inside
BSMJ 0.44kv 1~50kvar three phase 
Voltage:440V
Capacity:1~50KVAR 
Rated capacity UF:15.7~786.3UF
Rated current :1.3A~64.2A
Power capacitor single phase 440v 15kvar 50hz /60hz cylinder type Ce certificate  Specification

Series	Power capacitor single phase 440v 15kvar 50hz /60hz cylinder type Ce certificate
Rated Voltage Range	From 220-1000 VAC
Capacitor Connection	3 phase (1 phase on request)
Capacitor Frequency	50/60 Hz.
Capacitor Power Range	5- 60 KVAR
Dielectric	Metalized polypropylene film with self healing
Protection	IP 42 (IP 54 on request)
Discharge Resistors	Built in automatic discharge resistors included, less than 75V within 3 minutes after de-energizing the capacitor
Tolerance	±5%
Maximum Ambient Temperature	-25 °C--50°C  (Other temperature range on request)
	Average temperature within 24 hours below 40°C&average
	temperature with a year below 30°C
Max. Relative Humidity	≤90%
Max. Altitude	≤2000m (Other altitude on request
Over Voltage Tolerance	1.1   UN  (8 hours max. in every 24 hours)
	1.15 UN  (30 minutes in every 24 hours)
	1.2 UN  (5 minutes in every 24 hours)
	1.3 UN  (1 minutes in every 24 hours)
Over Current  Tolerance	30% permanently
Max. Surge Current	200 times of rated current
Dielectric Loss	≤0.2 Watt / KVAR
Voltage Test	Between terminals: 2.15 Un for 10 seconds.
	Between terminals to container:  3000VAC for 10 seconds
Safety System	Self protection device
Capacitor Case Material	Rust-Proof painted steel
Execution	Indoor, minimum distance between units  : 50mm
Standard	IEC60831 / GBT12747