100kVA Pole Mounted Single Phase Oil Immersed Distribution Transformer

Product Description

pole-mounted distribution transformers are mounted above ground on poles. These transformers typically service urban and rural residential and commercial loads. Others are light industrial and commercial lighting applications.
ANSI pole-mounted transformers are available in a continuously self-protected (CSP) version from continuous overload and network protection from transformer faults.

Product scope

• Single-phase up to 167 kVA
• Three-phase up to 315 kVA
• Primary voltage up to 36 kV
• Secondary voltages up to 480 V
• Cooling type: ONAN
• Available fluids: mineral oil and ester fluids

What is a Distribution Transformer?

A distribution transformer, typically located near consumer load points, is a step-down transformer used in power systems. It decreases the high voltage to a safer, user-friendly level. Common voltage ratings range from 11 kV to 110 V. These transformers are designed for peak efficiency at 60-70% load utilization.
Looking for the most cost-effective solution for your power needs? Check out our competitively priced three-phase and single phase meter box price.

What is a Power Transformer?

A power transformer is mainly used to transmit high electric power at high voltage levels through power lines to the distribution centers. They generally have high MVA ratings. Power transformers are mainly used for increasing low voltage levels to high voltage levels for transmission, maximizing efficiency at or close to full loads. 
Technical Specification

Single Phase Pole Mounted Transformer
Rated Power (KVA)	High Voltage (KV)	Low Voltage (V)	Loss (W)
			No-load Loss (W)	On-load Loss (W)
10	24.94/14.4kV 12.47/7.2kV 34.5KV/ 19.92KV/ 13.8KV/ 13.2KV/ or others	120/240V 480Y/ 277V 600Y/ 347V	36	120
15			50	195
25			80	290
37.5			105	360
50			135	500
75			190	650
100			210	850
167			350	1410
333			-	-

 

Technical Data For Single Phase Pole Mounted Transformer CSP Type
Rate power	High voltage	Low voltage	No load losses(w)	On load losses(w)	Weight(kg)
10kVA	34500/19920V 13800/7957V 13200/7620V 12470/7200V or others	120-240V 240-480V 347V 600V	50	120	150
15kVA			65	195	205
25kVA			105	290	245
37.5kVA			140	360	335
50kVA			180	500	370
75kVA			250	650	505

Product Paramenters

Single Phase Pole Mounted Transformer
Rated Power (KVA)	High Voltage (KV)	Low Voltage (V)	Dimension(mm)			Weight(KG)
			W	D	H	Oil Weight	Total Weight
5KVA	24.94/14.4kV 12.47/7.2kV 34.5KV/ 19.92KV/ 13.8KV/ 13.2KV/ or others	120/240V 480Y/ 277V 600Y/ 347V	465	485	855	15	92
10KVA			500	525	885	22	150
15KVA			520	565	905	30	210
25KVA			560	590	935	45	258
37.5KVA			610	625	935	50	340
50KVA			635	675	1035	62	395
75KVA			745	840	1035	88	480
100KVA			770	965	1035	94	530
167KVA			795	890	1035	138	680
250KVA			988	1001	1035	150	780
333KVA			1012	1015	1035	172	850

D11-M1.R series single-phase column distribution transformer parameters(ordinary silicon steel sheet iron core)

Model	Cap.(kVA)	Voltage (V)			Loss (W)		Dimensions(mm)				Weight (kg)
		HV	Tap range	LV	No load	Load	A	B	C	D	Oil	Gross
D11-3	3	33000 30000 17321 11547 13800 7967 7620 6350 or other	±2x2.5% Or other	120 220 240 250 or other	9	45	800	400	500	300	10	70
D11-5	5				19	75	860	430	510	340	15	92
D11-10	10				36	120	910	470	550	380	22	150
D11-15	15				50	195	970	500	580	410	30	210
D11-25	25				80	290	1025	550	630	450	45	258
D11-37.5	37.5				105	360	1225	630	680	520	50	340
D11-50	50				135	500	1235	630	680	520	62	395
D11-75	75				190	650	1300	680	720	550	88	480
D11-100	100				210	850	1350	780	810	610	94	530
D11-167	167				350	1410	1460	830	890	660	138	680
D11-250	250				500	2000	1570	960	950	660	250	990
D11-333	333				650	2500	1660	960	960	660	300	1160

The above data is for reference only and can also be customized according to user requirements