A-VS1TP series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC AC or pulsed currents.
| Electrical data (Ta=25ºC±5ºC,RL=2KΩ,CL=10000PF) |
| Type |
A-VS1TP-
100V |
A-VS1TP-
220V |
A-VS1TP-
380V |
A-VS1TP-
500V |
A-VS1TP-
800V |
Unit |
| Rated voltage(Vpn AC) |
±100 |
±220 |
±380 |
±500 |
±800 |
V |
| Measure range(Vp AC) |
0-±150 |
0-±330 |
0-±570 |
0-±750 |
0-±1000 |
V |
| Rated output |
@Vp=±Vpn ±20±1% |
mA |
| Turns ratio(Np/Ns) |
3333:1000 |
T |
| Measure resister |
54~580 |
Ω |
| Supply voltage |
+24 |
V |
| Power Consumption |
≤20+IpX(Np/Ns) |
mA |
| Offset current |
@Vp=0 ±0.2 |
mA |
| Offset drift |
@ -40~+85ºC ≤±0.5 |
mA /ºC |
| Linearity |
@Vp=0-±Vpn ≤0.2 |
%FS |
| Response time |
≤20 |
ms |
| Galvanic isolation |
@ 50HZ,AC,1min 2.5 |
KV |
·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·Electrochemical
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation: 1:OV 2:+24V 3:IOUT
4:+V 5:NC 6:-V
1. When the voltage will be measured goes through a sensor, the current will be measured at the output end.(Note: The false wiring may result in the damage of the sensor)
2. Custom design in the different rated input current and the output current are available.
·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000
| |
Value |
Unit |
| Operating temperature(TA) |
-40 to +85 |
ºC |
| Storage temperature(TS) |
-40 to +125 |
ºC |
| Mass(approx) (M) |
43 |
g |
Audited Supplier 
){kind=link}
){kind=link}